Quality of the products rely mainly on the main raw material of rubber conveyor belt
"rubber" quality decision, the film quality of high and low pressure glue machine output to a certain extent determines the conveyor belt is smooth, the appearance of the finished product and texture inner dense, rubber conveyor belt plasticizing quality of the rubber and the screw configuration and screw length to diameter ratio is bigger, related hot feed extruder compared with cold feed extruder, in general The plasticizing comprehensive quality of cold feed extrusion process is better than that of hot feed extrusion. According to the internal structure, the steel wire rope lifting belt can be divided into: ordinary structure type, transverse enhancement type, embedded coil tear prevention type. Conveyor belt in the use of general first empty machine to start, so as to avoid motor overload and large inclination conveyor belt skid, stop before all the material should be unloaded. 5. In the use of tension should not be too large, should not slip with the transmission roller and the material is not transitional premise, to ensure the work under small tension.
The outer packaging of the conveyor belt plays a protective role in the process of handling and storage. Care should be taken during loading and unloading, and do not be barbaric handling to prevent damage to the rubber conveyor belt. Steel wire rope lifting belt has high tensile strength, good impact resistance, long life, small elongation, good slotting, good flexural resistance and flexibility for long distance, large distance, high speed conveying materials. The product is composed of core glue, wire rope, covering layer and edge glue nylon conveyor belt. The middle sandwich canvas is nylon canvas. Nylon CONVEYOR BELT has the characteristics of thin belt body, high strength, impact resistance, good slotting, large interlayer adhesion, excellent flexion and long service life, etc. It is suitable for conveying materials in medium and long distance, high load and high speed, widely used in mining, coal yard, chemical industry, metallurgy, construction, port and other departments. The better way for the conveyor belt is to use a crane. When lifting, use a shaft rod with sufficient strength to pass through the center of the belt roll, and then use a steel cable sling with a beam to smoothly lift, so as to avoid cable tightening and damaging the edge of the conveyor belt. Rubber conveyor belt unloading should be free, smooth and slow down to touch the ground, do not tilt to the ground, do not open the packaging of the conveyor belt when handling. Try not to roll the belt. If it must be rolled, please clean the ground before rolling to prevent the edge conveyor belt from being punctured or hurt by hard objects. The rolling direction should be consistent with the rolling direction of the belt. Do not roll backward to prevent loose coil. Forklift lift can also be used to move, do not damage the belt body when moving. Recommended reading: wavy guard conveyor belt empty edge control in the number of better.