1. After purchase, do not use it directly outside, put it in a dry and ventilated place, pay attention to fire prevention and moisture-proof, especially in the finished product warehouse, can not appear Mars.
2, if the installation of wavy guard conveyor belt, must be installed in the correct order of the conveyor belt, do not install the reverse, if the reverse, will cause the double wear of the conveyor belt and conveyor, greatly reduce the service life, the material can not complete the transmission.
3. It is usually necessary to check the baffle and partition of the wavy baffle conveyor belt. Especially after long time use, the baffle and partition will become loose, especially if the baffle and partition can not be used, it must be replaced in time.
4, conveying material direction and blanking speed and conveyor belt direction and speed.
5, empty machine start, avoid motor overload, wavy guard conveyor belt skid. Remove all materials before shutdown.
6, the use of guard conveyor belt to prevent folding and hard material pressure, should be crimped use and storage.
7, the undulating guard conveyor belt tension should not be too large, should ensure that the use of tension is small.
If the undulating guard conveyor belt slips or cannot be pulled, the fault should be removed in time and the tensioning system adjusted to keep the elastic device flexible.
In the conveying process, do not make the conveyor belt run off or snake. It should be adjusted in time.