In which field of the coal industry, there are many metallurgy now, so the pattern conveyor belt is also a common tool for industrial production. The pattern conveyor belt composed of multiple components, the steel wire rope conveyor belt manufacturer, in order to ensure the use effect and service life of the conveyor belt, the rubber used. There are different choices for each part of the rubber. Generally speaking, there are four main types of commonly used rubbers: masking glue, buffer glue, cloth layer glue and cloth layer glue. So how to determine the proportion of these kinds of glue? For the covered rubber conveyor belt using covered rubber, it is easy to produce impact wear and even corrode materials when conveying objects, and at the same time, it is also accompanied by the aging effect of the steel wire rope conveyor belt itself. In this case, the conveyor belt has requirements for rubber materials. The tensile strength and wear resistance of the covering rubber are relatively high, and it has the characteristics of aging resistance and corrosion resistance, and is the covering rubber conveyor belt. In the formula, the general raw rubber is mainly natural rubber, and the rubber content is about 50%. The sulfur system still adopts the traditional coordination system of sulfur and accelerator, and the accelerators are M and DM. The main function of the buffer glue is to increase the adhesion, so it is used to cover the glue layer and the core layer. In this way, it can play a buffering role and disperse the impact force of the material, and the buffer rubber itself has the characteristics of large elasticity, less heat generation, and good heat dissipation, which ensures good adhesion. For buffer gel, accelerator M, MD, TMTD system. For conveyors running horizontally, the old conveyor can be cut off at any point, the conveyor is inclined in the direction, and the cutting point needs to be selected to prevent the weight from slipping out of control. After the new belt is placed on the conveyor, one end of the belt is fixed with a clamp, and then the drum is connected with the rope of the pulley, and the conveyor belt balances the traction device on the conveyor through the belt. When pulling, the conveyor belt and the frame should be prevented from squeezing each other. The pattern conveyor belt is simply introduced here. If you have any related questions, please call and leave a message for consultation, we will serve you wholeheartedly!