Reasons for the deviation of the fabric core conveyor belt

Fabric core conveyor belt is a common conveyor belt of PVC conveyor belt, which is widely used in logistics, production and processing in various industries. Among them, fabric core conveyor belt is a relatively common type, which is widely used because of its strong transmission capacity and long service life. However, in the process of use, we may encounter the problem of deviation of the fabric core conveyor belt, which will affect the work efficiency, and may even cause damage to the equipment repeatedly.

The reasons for the deviation of the fabric core conveyor belt are more complicated, mainly as follows:

1. The design of the equipment is unreasonable: the design of the conveying equipment is unreasonable, the installation is not standardized, the debugging is not in place, etc., which will easily lead to the deviation of the fabric core conveyor belt. In this case, it is necessary to redesign the equipment and carry out reasonable installation and commissioning so that the conveying equipment can operate normally.

2. Material adhesion: During the conveying process, some materials will adhere due to moisture or other reasons, which will directly lead to the deviation of the fabric core conveyor belt. In this case, it is necessary to take measures to clean up the material in time, and arrange a spray water system in the area where the material flows through to increase the humidity on the surface of the material to reduce the adhesion of the material.

3. The load height is different: the balance performance of the fabric core conveyor belt is mainly affected by the load height. Therefore, when the load is conveyed, it is necessary to ensure a balanced distribution of the load height as much as possible to prevent the center of gravity of the load from shifting and causing the core cloth conveyor belt to deviate.

4. Uneven tension of the conveyor belt: Uneven tension of the conveyor belt is also one of the main reasons for the deviation of the fabric core conveyor belt. During use, if the tension of the conveyor belt is uneven, it will cause the conveyor belt to move left and right, and eventually lead to deviation. In this case, it is necessary to increase the tension of the conveyor belt to ensure uniform tension.

To sum up, there are many reasons for the deviation of the fabric core conveyor belt, and we need to investigate one by one during use and take corresponding measures. Through targeted adjustments, the deviation phenomenon of the fabric core conveyor belt can be reduced, the coordination efficiency of the equipment can be improved, and the production process can be ensured smoothly.