The general production of
belt conveyor electric roller are: oil-cooled electric roller, oil-immersed cycloidal electric roller, cycloidal external mounted electric roller;
a, the method of electric drum refueling
There are usually two ways to ensure the number of electric drum refueling, and only one simple and accurate method is introduced here.
Place the electric drum horizontally and rotate the drum body so that the oil outlet on the end cover is at the height of 1/3 of the diameter of the drum. At this time, oil is injected from the refueling hole until the oil spills out of the oil drain hole. At this time, the liquid level inside the drum should be 1/3 of the diameter of the drum.
b, the amount of refueling electric roller
The amount of refueling of electric drum is determined according to the actual needs. Through the calculation and statistics of various kinds and specifications of electric drum, it is concluded that the amount of cooling oil is appropriate to reach the liquid level height of oil to 1/3 of the diameter of the drum. This amount of oil can basically meet the cooling of the electric drum motor. Motor generally has 1/4-1/5 volume immersed in oil. The lower edge of the transmission gear can be in the oil, and the drum can be rotated to meet the needs of cooling and lubrication.
