First of all, we must understand what causes the delamination, if you do not even understand the reason, directly take corresponding measures to solve the problem, there must be no way to solve the problem.
The reason why the conveyor belt will delamination is that, first of all, the contact between the upper and lower layers and the edge suburbs is radian, so it is easy to form space, resulting in edge glue cracks, and thus delamination.
The second reason is because the core layer in the middle of the conveyor belt core is on a plane, so the adhesion between the edge glue and the conveyor belt core is relatively small, which is easy to lead to the edge glue easy to fall off. In addition, the upper and lower parts of the conveyor belt,
The width of the corner is too large, which is also the reason for our delamination. Of course, the specifications of the edge glue used by different manufacturers are not the same, which requires people to drag the conveyor belt of different thickness.
Not only the labor intensity is very large, and the quality is not very stable, so it is easy to lead to the width of the belt is not uniform.
Thus, we will find that the zoom structure is unreasonable, the single variety is the main cause of nylon conveyor belt delamination, so if you want to solve this problem, you can adjust the core of the bottom layer of the top
Width, so as to fundamentally solve the problem of side leakage cloth. Once the nylon conveyor belt is delamination, it will affect the production and even cause the scrap of the whole conveyor belt.
So in the specific use process, we must try to pay attention to these problems, and take corresponding measures to solve the problem.
Must not be ignored, because a lot of people just because of ignoring these problems, so that our production of a series of accidents.
Lightweight conveyor belts and heavy conveyor belts
Advantages of the V type belt conveyor
Advantages of Telescopic Belt Conveyors
Manufacture of plate chain conveyor
