Deviation
of the pattern conveyor belt in operation is a common problem. Generally speaking, this problem can be effectively prevented, but once we do not pay attention to it, the consequences of deviation are also more serious, so it is necessary to find the problem in time to solve the problem.
As a common problem, the main reasons for deviation are as follows:
First, the axis of the roller driven by the head of the pattern conveyor belt or the tail to the roller is not perpendicular to the center line of the conveyor, which will make the tension on both sides of the roller inconsistent and the phenomenon of "running loose but not running tight". Second, when the diameter of the outer surface of the roller of the pattern conveyor belt is different, the conveyor belt will deviate to the side with the larger diameter. Three is the conveyor belt transfer point at the improper location of the material, the lower the relative height between the two belts at the transfer point, the easier it is to cause the pattern conveyor belt to run off.
In view of the above problems, we need to give corresponding solutions, the most basic is to ensure that all parts of the pattern conveyor belt are in the best position, to ensure that the surface of the roller is clean. In addition, the relevant technical personnel should always maintain a positive attitude to work, find out the problem in time to deal with the problem, according to the judgment of the horizontal center line of the roller and the longitudinal center line of the conveyor, the conveyor head and tail bearing seat plane deviation value, the position of the material on the conveyor belt detection.
Mechanical Conveyor Belt: Enhancing Efficiency in Material Handling
Vacuum Conveyor Belt: Enhancing Material Handling Efficiency
The Advantages and Applications of Conveyor Padded Chain Systems
