1, fixed
belt conveyor accessories should be installed on a solid foundation; Mobile belt conveyor before operation, the wheels should be symmetrical wedge tight. When multiple machines work in parallel, a channel of more than 1m should be set aside between each other. There should be no accumulation around the conveyor that hinders the work.
2. Before starting, the tightness of the conveyor belt should be adjusted, the buckle should be firm, the transmission parts such as bearings, gears and chains should be in good condition, the idlers and protective devices should be complete, the electrical protection should be connected to zero or ground properly, and the width of the conveyor belt and roller should be the same.
3, when starting, should be no-load operation, until normal operation, before uniform loading. Do not start after loading.
4. When feeding, the conveyor belt should be aligned with the center and the height should be lowered to reduce the impact of blanking on the conveyor belt and roller. The feeding should be kept even.
5, the operation, should be observed at any time, when the conveyor with slack or deviation phenomenon, should stop for adjustment.
6, operation, no one from the conveyor belt under the cross, or from above. When the conveyor belt slips, it is strictly prohibited to pull it by hand. Cleaning or maintenance operations are strictly prohibited during operation.
Optimizing Operations with PE Conveyor Belts: Durability, Efficiency, and Versatility
Exploring the Efficiency and Versatility of Light Conveyor Belts
Polyester Conveyor Belts: Enhancing Efficiency and Reliability in Material Handling
